WOODWORKING
MORE MISSION FURNITURE PLANS

MAKE MONEY FLIPPING FURNITURE
If you’re looking for a home business that can return you a profit in as little as 24 hours, then ‘flipping furniture for profit’ will shock you!

REVIEW OF TED'S WOOD-
WORKING


WOOD WORKING FOR BEGINNERS




MAKING MISSION STYLE FURNITURE
HOW TO MAKE A WOOD PEDESTAL
WOODWORKING WOOD
MAKING FURNITURE
HOW TO MAKE WOOD FURNITURE

A CELLARETTE PEDESTAL

how to make a wood pedestal
Plain-Oak Cellarette Pedestal

The illustration shows a unique article for the den. It serves as a pedestal and has one side which opens on hinges allowing the inside to be used as a smoker's cabinet or cellarette. All the lines are straight and the corners square, making it easy to construct. White oak will make up best, although ash, birch or southern pine may be used with good effect.

Stock of the following sizes should be bought, surfaced and cut to width and length:

  • 2 top pieces, 7/8 by 12 by 12 in., S-2-S.
  • 2 base pieces, 7/8 by 14 by 14 in., S-2-S.
  • 2 sides, 7/8 by 8 by 35-5/8 in., S-2-S.
  • 1 back, 7/8 by 6-1/4 by 35-5/8 in., S-2-S.
  • 1 door, 7/8 by 6-1/4 by 34-3/4 in., S-2-S.
  • 4 blocks, 7/8 by 4 by 4 in., S-2-S.
  • 4 shelves, 7/8 by 6-1/4 by 6-1/4 in., S-2-S.
  • 4 pieces, 7/8 by 1 by 10 in., S-4-S.

Make the top and base of two pieces, glued and screwed together with the grain crossed. This method prevents warping. To keep the end grain from showing, a strip of 3/8-in. lumber may be put on all around as shown in the drawing.

Have the sides, front and back squared up perfectly. The sides are to overlap the back and to be fastened to it with round-head brass or blue screws. To the center of the top and base attach one of the 6-1/4-in. square pieces. Over these, fit the sides and back and fasten them with screws or nails. The four corner blocks are now put under the base.

Two or more shelves may be set in as shown. Brass or copper hinges will look well if a dark stain is to be used.

Around the sides and back a 1-in. strip should be fastened to the base to give added strength.

Pumice stoneIf a dull finish is desired, apply two coats of stain and two of prepared wax. If a polished surface is wanted, first fill the pores of the wood with any standard filler, which can be purchased at a paint store. After this has dried partly, rub off any surplus filler, rubbing across the grain of the wood. When perfectly dry apply one coat of shellac and as many coats of varnish as desired, rubbing down each coat, except the last, with No. 00 sandpaper and pumice stone.

how to make a wood pedestal
Detail of Cellarette Pedestal

Woodworking: How to Make a Wood Mission Style Cellarette Pedestal
Page Updated 6:14 PM Saturday 10 March 2018
Web Page Copyright 2018 by Donovan Baldwin